 |
PO Box 1069 Fond du Lac WI 54936-1069 USA |
Fax: 920-922-2944 |
|
|
PO Box 1069 Fond du Lac WI 54936-1069 USA |
Fax: 920-922-2944 |
| Click
here to visit our online store! Having
trouble
finding our
products? Now you can purchase direct from the new Alpha Slot Racing Products Online Store! Where we have most of the
items from our catalog plus a few more. Click here to buy
directf rom our new online store! |
Magnets... |
| NEW CAHOZA
TORNADO 5 CERAMIC "C" CAN MAGNETS
These new magnets are producted from special Japanese material, they are manufactured using anisotropic technology and after zapping the magnetic are radially oriented, their magnetic strenght is higher by 10% than Mura or Tornado 3 magnets, height 14.15mm (.555"), length 11.5 mm (.453"), thgickness 3.95mm (.155") |
#CAH277 |
TS 2000 SAMARIUM COBALT MAGNETS
These are TALL SINGLE MAGNETS made
from the best
available
magnetic material. The inside and outside radius are designed for
a perfect fit in contemporary cans (Cahoza, Koford, Camen, etc.) and
require
a minimum amount of honing. |
|
|
|
|
| TS2000-G7B These new tall single magnets are made from the best available magnetic material. They are just a bit taller, longer, and thicker than our TS2000-G7 mags. The extra magnet mass means more torque, brakes and increased motor life. For group 7 motors with ari gaps near 490... demensions... .452 tall x .380 long, x.073 thick. ID = .490 Od = .630 |
TS2000-G7B |
|
|
|
| MODULAR MAGNETS
We now offer economical “Modular” cobalt “single” magnets, which will work well in many strap cans. There are three types, which differ only in length. All are .402” tall with ID of .472” and OD of .620”. They are designed to be honed and are easily honed with flat spots at the tips and .074” thickness. Hone just a little with .459 armatures or more to use the .480 armatures. Pairs are matched and fully magnetized. |
#842-374 - .374” long #842-400 - .400” long #842-440 - .440” long |
|
|
|
| TALL SINGLE MAGNETS
New from Alpha. Two new tall single magnets (legal for Formula-2000 rules) intended for use with armatures .480” diameter and larger… (all have a .488 I.D. before honing.) All of these new magnets are recommended for Cobalt 12 motors (glue or spray glue) and also for open motors (spray glue and Formula-2000). |
#S450-355F - .355” long x .450” tall, flat tip.
(.074”
thick). #S450-380A - .380” long x .450” tall, angle tip. (.070” thick). |
|
|
|
| THOR-59 QUAD MAGNETS
(.400 long, .400" tall, .069" thick) Designed open class motors with armatures of a .460" diameter or less. These magnets can be used with Koford, Slick–7, or GTO center magnets to make 6 magnet motors. The segments are magnatized. The bonded Thor-59 Quad Magnets are fully charged bonded together, and ready to install. We use a high strength, much higher temperature adhesive to put the pairs together. They are fully magnetized, and are as easy to install as two magnet sets. Matched for strength! |
#844 – segments #845 – bonded pair |
|
|
|
| THOR TALL QUAD MAGNETS
- $59.95 per pair (segments) - $69.99 per pair (bonded) (.420" tall, .380" long, .069 thick) Designed for larger open motors with .480" diameter armatures. For maximum torque and racing on high powered tracks. They can be used with Koford, Slick–7, or GTO center magnets to make 6 magnet motors. Segments magnetized - not bonded. The bonded Thor Tall Quad Magnets, are fully charged, bonded together, matched for strength, and ready to install. We use a high strength, much higher temperature adhesive to put the pairs together. They are as easy to install as two magnet sets. This is a great magnet for Opens, Group 27, and the Cobalt 12 class. |
#846 - segments #847 - bonded pairs |
|
|
|
